End-pumped Laser Marking Machine on plastic frisbee with high speed
1. Using the German 808nm fiber-coupled diode pumped solid-state
lasers, the conversion efficiency of electro-optical is up to 60%,
and the the beam quality is Temoo mode, suitable for processing
transparent keys products and high precision marking on metals.
2. Adopted original German SCANLAB scanner head. Mark fast, the
speed is more than 4 times than the ordinary YAG lamp-pumped laser
marking machine, then saving your labor cost.
3. All air-cooling, no consumables, no need maintenance with 5
years, low cost. Energy saving, the whole power is only 500W.
Comparing to YAG lamp-pumped laser marking machine, it can be
saving annual electricity charges around USD2000-USD3000.
4. Integrating modular design, easy maintenance, small volume to
save your value floor space.
5．Without consumables cost, clear marking, not easy to wear, high
efficiency of engraving and cutting, environmental
6. DXF ,PLT, BMP ,AI ,JPG and other documents supported in the
software, and can form the serial number, production date, bar code
and planar bar code automatically . Support online flying, rotating
marking, and support XY platform with large area partitioning
LB-EP Semiconductor end-pumped laser marking machine adopts
advanced fiber-coupled semiconductor laser end-pumped way, with
high reliability, long service life, high efficiency of energy
conversion, good beam quality, low power consumption ,
semiconductor solid-state full of wind cooling device, the laser
source and the resonant cavity of the fission structure, easy
maintenance, light weight, system integration and so on.
|Laser output power||≤12W|
|Q-switched laser frequency||0kHz~100kHz|
|Optional Marking scope|
|Minimum line width||0.01mm|
Single phase Single-phaseAC
|Marking speed||500 characters/s Single Roman font character with height 1mm)|
|Host system size||800mm×650mm×1400mm|
Metal and nonmetal materials, high hardness alloys, oxides,
plating, coating, ABS, epoxy resins, inks, industrial plastic and